Filter
Top Products
Changing channel settings
19
DX-32L/37L/40L/46L
2 Press or to highlight Channel, then press . The Channel
menu opens.
3 Select the signal source of the channel you want to set up on the
favorites list.
4 Press or to highlight Favorites, then press ENTER. The
favorite channel list opens.
5 Press or to highlight the channel you want to add to the
favorite list, then press ENTER to mark the channel. A check
mark appears if the channel is added to the list. The check mark
disappears if you delete the channel from the list.
Note: If the list has more than one page, press or to scroll through
the pages.
6 Press EXIT to close the menu.
7 To select a channel in the favorite channel list, press FAVORITE,
press or to highlight the channel, then press ENTER.
Adding or changing a channel label
If a channel is not already labeled, you can label the channel to make it
easier to identify. You can also relabel a channel that is already labeled.
To label a channel:
1 Press MENU. The Picture menu opens.
2 Press or to highlight Channel, then press . The Channel
menu opens.
3 Select the signal source of the channel you want to label.
4 Press or to highlight Channel No., then press or to
select the channel you want to label.
5 Press or to highlight Channel Label, then press ENTER.
The Channel Label screen opens.
6 Press or to select a character, then press or to move to
the next position. Repeat to add more characters.
7 Press MENU to exit to the previous menu.
Select
Move
MENU
Exit
Auto Scan
Channel No.
Channel Label
DTV Signal:
Audio SetupPicture Channel
2.1
Normal
WGBH-SD
TV Source
Antenna
Show/Hide
Favorites
Picture
Select
Move
MENU
Exit
Picture Mode
Contrast
Brightness
Color
Tint
Advanced Video
Audio Setup Channel
Custom
70
40
60
0
Sharpness
50
Backlight
30
Select
Move
MENU
Exit
Auto Scan
Channel No.
DTV Signal:
Audio SetupPicture Channel
2.1
Normal
TV Source
Antenna
Show/Hide
Favorites
Channel Label
WGBH-SD
Select
Move
MENU
Exit
Audio SetupPicture Channel
ABCದ
DX-32L-37L-46L150A11_10-0012.book Page 19 Thursday, January 14, 2010 8:30 AM