Filter
Top Products
Making connections
11
DX-24L230A12/DX-32L220A12/DX-46L261A12
Using composite video (good)
To connect a cable or satellite box using composite
video:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect a composite cable (provided) to the VIDEO,
L and R jacks on the side of your TV and to the
composite video and audio out jacks on the cable or
satellite box.
4 Turn on your TV, then turn on the cable or satellite
box.
5 Go through the setup wizard on page 18.
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the
ANT/CABLE IN jack on the back of your TV and to
the coaxial out jack on the cable or satellite box.
4 Turn on your TV, then turn on the cable or satellite
box.
5 Go through the setup wizard on page 18.
VIDEO
AV IN
AUDIOL
L
R
AUDIO
R
AUDIO OUT
HDMI 2
SERVICE PORT
Side of TV
Cable or satellite box
Composite cable
Cables are often
color-coded to match
color-coded jacks.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
COMPONENT IN
ANT/ CABLE IN
P
B
Y
AUDIO
LR
PR
Cable or satellite box
Back of TV
Coaxial cable
DX-24L-32L-46L_11-0908_V2.book Page 11 Thursday, August 25, 2011 2:57 PM