Filter
Top Products
Understanding the basics
19
DX-24L230A12/DX-32L220A12/DX-46L261A12
• If your TV is connected to a cable or satellite box
using a component video cable, select
Component.
• If your TV is connected to a cable or satellite box
using a composite video cable, select AV.
Understanding the basics
Turning your TV on or off
To turn your TV on or off:
1 Make sure that the power cord is connected to a
power outlet.
2 Press (Power) to turn on your TV. The power
indicator LED turns off.
3 Press (Power) again to turn off your TV. Your TV
enters Standby mode.
Selecting the video input source
To select the video input source:
1 Turn on your TV, then press INPUT. The INPUT
SOURCE list opens.
2 Press or to highlight the video input source,
then press ENTER. You can also press a direct input
button on the remote control to select the video
input source.
• Press VIDEO to select the device connected to
the AV IN jacks.
• Press HDMI one or more times to select the
device connected to the HDMI 1 or HDMI 2 jack.
• Press TV to select the TV input source.
•Press COMP to select the device connected to
the COMPONENT video jacks.
• Press VGA to select the device connected to the
PC IN VGA jack.
Using the on-screen menus
Picture menu (TV mode)
Audio menu (TV mode)
Settings menu (TV mode)
Channels menu (TV mode)
Notes
• Depending on the signal source selected, you
may see different options on your screen. The
following menus are shown in TV mode.
• Menu items that are not selectable are grayed
out.
• Menus in this manual are described in TV mode,
unless otherwise indicated.
• The screens shown in this manual are for
explanation purposes and may vary from the
actual screens on your TV.
TV
Component
VGA
INPUT SOURCE
AV
HDMI1
HDMI2
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Advanced Video
Audio Settings Channels
Custom
70
40
60
0
Sharpness
50
Backlight
30
Reset Picture Settings
Select
Move
EXIT
Exit
MENU
Back
Adjust settings to affect picture quality.
Sound Mode
Treble
Bass
Balance
Auto Volume
Audio Language
Custom
57
50
0
Digital Audio/SPDIF
Off
English
RAW
Picture Audio Settings Channels
Select
Move
EXIT
Exit
MENU
Back
Adjust settings to affect sound quality.
Surround Off
Reset Audio Settings
MTS/SAP
Mono
Time
Closed Caption
Menu Settings
Computer Settings
Parental Controls
Picture Audio Settings Channels
Input Label
System Info
Restore Default
Select
Move
EXIT
Exit
MENU
Back
Set various TV options.
Add/Skip Channels
Favorites
Channel Label
Channel Strength
Audio Only
Auto Zoom
Auto Channel Scan
Antenna
Off
Picture Audio Settings Channels
Select
Move
EXIT
Exit
MENU
Back
Adjust channel options.
Off
WGBH-SD
DX-24L-32L-46L_11-0908_V2.book Page 19 Thursday, August 25, 2011 2:57 PM