Dynex DX-55L150A11 Flat Panel Television User Manual


 
Making connections
9
DX-55L150A11
Connecting an antenna, cable TV, or
satellite TV box
If you are connecting a satellite TV or cable box, you can use
one of the following (if available):
•Best - HDMI cable
Better - Video component cables
Good - Video composite cable
Acceptable - 75-ohm coaxial cable.
To connect an antenna, cable TV, or satellite TV box:
Connect one end of a 75-Ohm, coaxial cable to the ANT/CABLE
IN jack on the back of the TV, then connect the other end of the
cable to the antenna or cable TV wall jack.
Notes:
We recommend using a 75-Ohm, coaxial cable to reduce interference
and noise that may be caused by radio wave transmissions.
Do not bundle the coaxial cable with the power cord or any other
cables.
If you are using an antenna and reception is not good, contact a
service technician to adjust the antenna.
Connecting a VCR, camcorder, or game
console
Note: If the VCR, camcorder, or game console has component jacks
(better), or an HDMI jack (best), connect them using the best available
connection.
To connect a VCR, camcorder, or game console:
1 Make sure that your TV’s power cord is unplugged and the VCR,
camcorder, or game console is turned off.
2 Connect one end of a standard AV cable (included) into the AV
IN1 VIDEO1 or AV IN2 VIDEO2 jack on the back of the TV, then
connect the other end of the cable to the AV OUT VIDEO jack on
the external device.
3 Connect the audio connectors of the AV cable (the red and white
connectors) to the AV OUT AUDIO jacks of the external device,
then connect them to the AV IN1 or AV IN2 L and R jacks on the
back of your TV.
To play the external AV device:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select AV1 or AV2 then press ENTER.
Note: You can also press VIDEO once to select AV1 or twice to select AV2.
3 Turn on the device, then start playback on the device.
Connecting a computer
To connect a computer:
1 Make sure that your TV’s power cord is unplugged and the
computer is turned off.
2 Connect one end of a VGA cable (not included) to the VGA jack on
the back of the TV, then connect the other end of the cable to the
VGA jack on the computer.
ANT/CABLE jack on the
back of the TV
Antenna, cable TV,
or satellite box
75-Ohm coaxial cable
ANT/CABLE jack on the
back of the TV
Home antenna terminal
(75 ohm)
ANT/CABLE
COMP
AV
VIDEO L R
Y P
b Pr
L
R
ANT/CABLE IN DIGITAL
AUDIO OUT
VCR, camcorder, or game console
AV cable
Back of TV
Note: Cables are often
color-coded to connectors.
Connect yellow to yellow,
red to red, and white to
white.
Back of TV
Computer
VGA cable
Audio cable
DX-55L150A11_10-1135_MAN_ENG_V1.book Page 9 Monday, October 25, 2010 12:02 PM