Filter
Top Products
6
STEP 2 - Select screws, washers, and spacers
1
Select the hardware for your TV (screws, washers, and spacers). Some TVs come with mounting
hardware included (usually in the holes on the back of the TV.) If you don't know the correct length of
the mounting screws your TV requires, test various sizes by hand threading the screws.
a. Select one of the following types of screws:
b. Select from the following washers:
c. For an irregular or obstructed TV back, use the universal spacers (I).
CAUTION:
To avoid potential personal injuries and property damage, make sure that there are
adequate threads to secure the brackets to your TV. If you encounter resistance, stop immediately and
contact customer service. Use the shortest screw and spacer combination to accommodate your TV.
Using hardware that is too long may damage your TV. However, using a screw that is too short may
cause your TV to fall from the mount.
2
Remove the screws.
Flat back Obstructed back
M4 × 12 mm screws (E) M4 × 35 mm screws (F)
M6 × 12 mm screws (J) M6 × 35 mm screws (K)
M8 × 16 mm screws (L) M8 × 36 mm screws (N)
M8 × 20 mm screws (M)
M4 washer (G)M6/M8 washer(H)
Screw is too
long
Screw fits
correctly
Screw is too
short
DX-DTVMFP23_14-1054_MAN_V1_ENG.fm Page 6 Friday, September 26, 2014 3:30 PM