Filter
Top Products
8
STEP 4 - Option 1: Attaching the mounting hardware to TVs
with a flat back
Note: If you plan to use a 5° tilt with a larger TV (42”+), we suggest using spacers with the mounting
brackets so that the bottom of the TV does not touch the wall.
1
Align the left and right TV brackets (B and C) with the screw holes on the back of the TV. Make sure that
the brackets are level.
2
Install washers (G or H), and screws (E, J, L, or M) into the holes in the back of the TV.
3
Tighten the screws until they are snug against the TV brackets. Do not over tighten.
You’ll need
or
or
G (4)
E (4)
Phillips screwdriver
B and C TV brackets
or
or
J (4)
H (4)
or
L (4)
Level
or
M (4)
DX-DTVMFP23_14-1054_MAN_V1_ENG.fm Page 8 Friday, September 26, 2014 3:30 PM