Filter
Top Products
DX-DTVMFP23
9
STEP 4 - Option 2: Attaching the mounting hardware to TVs
with irregular or obstructed backs
1
Place spacers (I) over the screw holes on the back of the TV.
1
Align the left and right TV brackets (B and C) with the screw holes on the back of the TV. Make sure that
the brackets are level.
2
If you are using M4 washers (G), place them between the spacers and TV brackets and over the holes in
the TV brackets. If you are using M6/M8 washers (H), place them over the holes in the TV brackets. Insert
screws (F, K, or N) through the washers, TV brackets, and spacers.
3
Tighten the screws until they are snug against the TV brackets. Do not over tighten.
You’ll need
or
or
If you are using M4 (G)
washers (only), place
them both in front of
and behind the
brackets.
G (8)
F (4)
Phillips screwdriver
I (4)
B and C TV
brackets
H (4)
or
or
K (4)
N (4)
or
DX-DTVMFP23_14-1054_MAN_V1_ENG.fm Page 9 Friday, September 26, 2014 3:30 PM