Filter
Top Products
Using your LCD TV
7
Adjusting the volume
To adjust the volume:
•Press VOL+ or VOL– to increase or decrease the volume. A
number appears on the screen to indicate the volume level.
•Press MUTE to mute the sound. Press MUTE or VOL+ to restore
the sound.
Selecting the video mode
To select the video mode:
•Press INPUT one or more times to select the video mode you
want. You can select TV, Composite, S-Video, VGA,
Component, or HDMI.
Selecting the TV signal source
To select the TV signal source:
1 Press MENU, then press CH+ or CH– one or more times until the
following menu opens.
2 Press VOL+ or ENTER, then press CH+ or CH– one or more times
to select Tuning Band.
3 Press VOL+ or ENTER to select the TV signal source. You can select
Cable Auto, Air, Cable, Cable HRC, or Cable IRC. If you use
satellite TV, select Air or Cable depending on the type of satellite
TV signal.
Memorizing channels
To select channels with the CH buttons, your LCD TV needs to memorize
channels. When your LCD TV memorizes channels, it scans for channels
with signals, then stores the channel information into memory.
To memorize channels:
1 Press MENU, then press CH+ or CH– one or more times until the
following menu opens.
2 Press VOL+ or ENTER, then press CH+ or CH– one or more times
to select Auto Ch Search.
3 Press VOL+ or ENTER to start scanning for channels. Your LCD TV
searches for channels that have a signal. Any channel that has no
signal or a poor signal are not saved. During the search, the
following appears.
Your LCD TV scans for analog channels, then scans again for digital
channels. When the search is complete, the first channel appears
on the screen.
Adding channels to the channel list
You can add channels that were not found in a previous scan for
channels.
For example, if your LCD TV found channels 1 through 20 and you select
the Add On Ch Search option, your LCD TV scans for channels starting
at 21.
To add channels to the channel list:
1 Press MENU, then press CH+ or CH– one or more times until the
following menu opens.
2 Press VOL+ or ENTER, then press CH+ or CH– one or more times
to select Add On Ch Search.
Adding or removing a channel
You can add or remove a channel to or from the channel list. If you
remove a channel from the list, your LCD TV skips the channel when you
press the CH buttons. You can still tune to the channel by pressing the
number buttons.
To manually add or remove a channel:
1 Press MENU, then press CH+ or CH– one or more times until the
following menu opens.
2 Press VOL+ or ENTER, then press CH+ or CH– one or more times
to select Manual Ch Set.
3 Press ENTER. The following appears.