Filter
Top Products
10
Note: Receiver models 1000, 2000, 3000, 4000, 5000,
JVC D-VHS, 7100, and 7200 cannot receive satellite
signals connected to the T
O DISH PORT f. Therefore,
connect LNBFs for the three satellite locations you want
these models to receive on T
O DISH Ports c through
e. It is recommended that FSS LNBFs be connected to
P
ORT f since the receivers listed in this note cannot
receive signals from FSS satellites anyway.
3. Connect a cable between T
O POWER INSERTER 1
connection on the switch and the power inserter marked
T
O SWITCH INPUT 1.
Do not install any devices between the power
inserter and the switch. The power from the
inserter may damage the device.
The power inserter must be installed in the
cable connected to the switch’s T
O POWER
I
NSERTER 1 or the switch will not work.
The power inserter is for indoor use only.