Filter
Top Products
46
Adjusting the Projector Function (“PRJ - ADJ” menu)
Auto Search
Auto Sync
Auto Power Off
System Sound
System Lock
h
On
On
On
On
SEL./ADJ. ENTER END
0Lamp Timer(Life) 100%
Pict. SCR PRJ - ADJ Net. Help
Speaker On
RS-232C 9600 bps
Fan Mode Normal
Disable
11
11
1 Auto Search Function
This function automatically searches for and
switches to the input mode in which signals are
being received, when the projector is turned on,
or when the INPUT button is pressed.
When “Auto Search” is set to “On”
• If two or more input signals are found, the pro-
jector selects the input source in the order of
INPUT 1 n INPUT 2 n INPUT 3 n INPUT 4
when you press INPUT (P/R) on the projector.
• While “Auto Search” is set to “On”, press
CINPUT 1,CINPUT 2, DINPUT 3 or
EINPUT 4 on the remote control to select
an input mode other than the input mode se-
lected by the projector.
Note
22
22
2 Auto Sync (Auto Sync
Adjustment)
Menu operation n Page 40
• Auto Sync adjustment is also performed by
pressing F AUTO SYNC on the remote con-
trol.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual ad-
justments. (See page 51.)
Note
Selectable items
On
Off
Description
Auto Sync adjustment will
occur when the projector is
turned on or when the input
signals are switched, when
connected to a computer.
Auto Sync adjustment is not
automatically performed.
• When the Auto Power Off function is set to
“On”, 5 minutes before the projector enters
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes.
Selectable
items
On
Off
Description
When no input signal is detected for
more than 15 minutes, the projector will
automatically enter standby mode.
The Auto Power Off function will be
disabled.
Note
33
33
3 Auto Power Off
Function
55
55
5 Speaker Setting
Selectable
items
On
Off
Description
The audio signal is output from the
internal speaker.
The audio signal is not output from the
internal speaker.
44
44
4
Setting the Confirmation
Sound (System Sound)
Selectable
items
On
Off
Description
A confirmation sound is made when
the projector turns on/off.
No confirmation sound is made.
EIP-3000N_EN_CD_j 06.5.10, 9:47 AM46