Filter
Top Products
51
Troubleshooting with the “Help” menu
Utilizing the “Help” menu func-
tions
This function advises you to solve the problems during usage.
• You can adjust the items with check marks (✔).
• The items in the “Help” menu change, de-
pending on the input signal or setting that you
have selected.
• If the problem is not solved, refer to
“Troubleshooting”. (See pages 59 and 60.)
• When selecting “sRGB” in "Picture Mode”, the
item “Color is faded or poor” is not displayed.
This means you cannot change input signal
types.
• When you select “Reset all adjustments to de-
fault settings” and then press ENTER, the
screen for entering the password appears if a
password has been set. (See page 49.)
Press O or Q to adjust.
If the image is not improved, se-
lect “Adjust horizontal noise.”,
then press hENTER.
Select “Initiate “Auto Sync” Ad-
justments”, then press hENTER.
Press P or R to select “Vertical
stripes or flickering image ap-
pears” on Help menu, then press
hENTER.
Example: When image flickering appears
Operation to solve image flickering when pro-
jecting the computer RGB signal.
3
4
5
6
There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
Reset all adjustments to default settings
SEL. ENTER END
If there is no change after performing "Auto Sync"
adjustments, adjust the following items.
Initiate “Auto Sync” Adjustments.
Help
Vertical stripes or flickering image appear
Vertical stripes or flickering image appear
Adjust vertical noise
Adjust horizontal noise
Reset the 2 items above
Return
Cur. sig. freq: H 43 kHz / V 60 Hz
SEL. ENTER END
Pict. SCR Net.PRJ Help
Note
Press BMENU/HELP.
1
2
Press O or Q to select “Help”, then
press hENTER.
Adjustment buttons
(P/R/O/Q)
ENTER button
MENU/HELP
button
0Phase
SEL./ADJ. Rtn. Menu END
Help
EIP-3000N_EN_CD_k 06.5.11, 10:21 AM51