Filter
Top Products
56
Helpful Functions Set during Installation (“Options2” menu)
Setting a Password
••
••
•
There is no factory preset for the password, so
the “Options2” menu is enabled.
••
••
•
If you do not want others to operate the “Op-
tions2” menu, set a password.
Menu operation Page 42
Example: “Options2” screen menu
1 Select “Password” from the “Op-
tions2” menu, and press
.
•
The screen for entering the password is displayed.
2 Press
''
''
' or
""
""
" to set the first digit in
“New Password” and then press
||
||
|.
3 Enter the remaining 3 digits and
press
.
4 Enter the same password in “Re-
confirm” and press
.
Note
• The password must be entered to use the “Op-
tions2” menu when a password has been set.
Changing the Password
1 Press
''
''
',
""
""
" and
||
||
| to enter the
password in “Old Password” and
press
.
2 Press
''
''
',
""
""
" and
||
||
| to set the new
password in “New Password” and
press
.
3 Enter the same 4-digit password in
“Reconfirm” and press
.
Note
• If you do not want to set a password, leave the
fields blank in steps 2 and 3 and press
.
• To cancel the password settings, press
.
If You Forget Your Password
If you forget the password, delete it using the fol-
lowing procedure and set a new password.
Note
• You can only use the buttons on the projector
to delete the password.
Press
.