Filter
Top Products
11
Rear Terminal
q w e
r
t
yi u
tUSB CONNECTOR (Series B)
Use this connector when controlling a computer
with the remote control of the projector. Connect
the USB terminal of your computer to this
connector with the supplied USB cable (p.20).
yS-VIDEO INPUT JACK
Connect the S-VIDEO output signal from video
equipment to this jack (p.21).
iAUDIO 2 JACK
Connect the audio output (stereo) signal from a
computer or video equipment connected to q to
this jack (pp.20–22).
oAUDIO 1 JACK
Connect the audio output (stereo) signal from a
computer or video equipment connected to w or
e to this jack (pp.20, 22).
rVIDEO INPUT JACK
Connect the composite video output signal from
video equipment to this jack (p.21).
uAUDIO 3 JACKS (L(MONO)/R)
Connect the audio output signal from video
equipment connected to r or yto these jacks
(p.21). For a mono audio signal (a single audio jack),
connect it to the L (MONO) jack.
q5 BNC INPUT JACKS
Connect the component or composite video output
signal from video equipment to VIDEO/Y, Cb/Pb,
and Cr/Pr jacks or connect the computer output
signal (5 BNC Type [Green, Blue, Red, Horiz. Sync,
and Vert. Sync.]) to G, B, R, H/V, and V jacks (pp.20–
22).
wCOMPUTER INPUT TERMINAL (ANALOG)
Connect the computer (or RGB scart) output signal
to this terminal (pp.20, 22).
eCOMPUTER INPUT TERMINAL (DIGITAL)
Connect the computer output signal (Digital DVI-D
type) to this terminal. The HD (HDCP compatible)
signal can also be connected (pp.20, 22).
o
Part Names and Functions