Filter
Top Products
English - 38 -
Delete
To delete a programme, press the RED button.
Pressing the RED button again erases the
selected programme from the programme list
and the programmes below shift one line up.
APS (Auto Programming System)
When you press the BLUE button for APS, Auto
Programming System menu will appear on
the screen.
Favourite mode
You can set various channels as favourites
so that only the favourite channels are
navigated. To set a favourite, use the navigation
buttons to select a channel and then press
the
item. The channel selected as a
favourite appears in the Program Table with a
favourites icon ( ) against the channel
name. For removing a favourite, carry out the
same operation. To exit, press M.
Program lock
Program Lock
Enter PIN
Change PIN
Back : Menu Exit : TV
Program Locking provides a password-
protected access to channels selected by
parents. In order to lock a channel you should
know the Program Lock password (default
value is set to 0000 in the factory and can only
be changed from the Program Lock menu).
Enter PIN
Select the channel that you desire to lock by
highlighting it and then press the
button.
When the
button is pressed, Program Lock
menu will be displayed on the screen. After
entering the pin code, desired channel will be
locked. The program lock icon will appear next
to the channel name. When the locked
channel is selected through P+ or P- buttons,
the following warning screen will be
displayed:
Program Is Locked!
You May Unlock this Program
from Program Table.
Change PIN
Select Change PIN by pressing / button.
Use
button to change the PIN code. After
pressing
button, the following message
appears on the screen:
Program Lock
Enter old PIN
Back : Menu Exit : TV
Enter old PIN code through the numeric
buttons and then enter your new PIN code.
Program Lock menu will be displayed on the
screen when you enter the new PIN code:
Program Lock
Enter new PIN
Back : Menu Exit : TV
Program Lock Menu will again be displayed
after a short while of the identification of new
PIN.
Hint: If you forget your Program Lock password, you
can deactivate the Program Lock by using the
code 7910 and be able to set new password for
future use. Thus, do keep this code in a safe
place for future reference.
ENG-19796W-1050UK-17MB24H-IDTV-(BACK LINE OUT-YPbPr-WO SVHS)-LIPS-50118956.p65 25.04.2008, 10:0738