Filter
Top Products
82
Setting the TV on the Wall
CAUTION
• This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other
wall mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the TV requires special skill that should only be performed by qualifi ed service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
Using an optional bracket to mount the TV
•
You can ask a qualifi ed service professional about using an optional AN-52AG4 bracket to mount the TV on the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
AN-52AG4
wall mount bracket.
(See the bracket instructions for details.)
About setting the TV angle
Vertical mounting
Angular mounting
PRO-70X5FD
• The center of the display:
25
/
64
inch (10.0 mm) above the "c"
position.
PRO-60X5FD
• The "e" position is at the center of
the display.
• Refer to the operation manual of
AN-52AG4 for details.
0/5°/10°
AN-52AG4
Optional Accessories
The listed optional accessories are available for the LED
LCD TV. Please purchase them at your nearest shop.
• Additional optional accessories may be available in the near
future. When purchasing, please read the newest catalogue for
compatibility and check the availability.
VISIT http://www.elitelcdtv.com for ordering, or call
1-855-ELITE-01.
Part name Model number
Wall mount
bracket
AN-52AG4
3D Glasses
AN-3DG20-EL
• Due to the terminal configuration on this TV, when you wall-mount this
model, make sure there is enough space between the wall and the TV
for the cables.
• To use this TV mounted on a wall, remove the AC cord holder and the
covers at the 4 locations on the rear of the TV, and then use the screws
supplied with the wall mount bracket to secure the bracket to the rear of
the TV.
2
1
1
Appendix