Filter
Top Products
NOTE: This feature is NOT available on ELMO DVR Remote.
Related Topics: Camera Setup | Control Setup | External Monitor
'
))%
Control settings are applicable only if controls are available and are being used.
Figure 8. Control Setup
Active Time
Active time refers to the designated time when the control is active (default is continuous 00:00-00:00). If the sensor is triggered
outside the specified time, it will be ignored.
Dwell Time
Dwell Time refers to the amount of time the control will remain active when it has been triggered.
". '
To create or modify control settings, follow these steps:
1. Click Enable on the desired control.
2. Enter the Name of the selected control.
3. Set the Active Time for the control if required.
4. Enter the Sensor which activates the selected control. If more than one sensor will activate the control, use commas to separate
the sensor numbers.
5. Enter the Dwell time for the control.
12 - ELMO USER MANUAL 2003G