Filter
Top Products
Figure 23. E-Map
!( !0"
To enable E-Map, follow these steps:
1. Click Enable E-Map to activate the E-Map on the main screen.
2. Select the Position No. of the desired position of the specified Screen Division in which the E-Map will appear.
3. Click Find > to select a bitmap to load into the E-Map.
4. Click Go to copy the selected image to the drawing area.
5. Select the camera Setting to set the position of the cameras, controls, and/or sensors
a. Camera : Select the camera, then click the desired position for the camera on the E-Map.
b. Control : Select the control, then click the desired position for the control on the E-Map.
c. Sensor : Select the sensor, then click the desired position for the sensor on the E-Map.
6. Click Save to save the setup settings.
. !0"
To delete cameras drawn on the E-Map, follow these steps:
1. Click the Delete Camera, Control, Sensor checkbox.
2. Click the camera, control or sensor you want to delete.
#%
28 - ELMO USER MANUAL 2003G