Filter
Top Products
Auto Tuning
Programme
Colour
System
Manual Tuning
Fine Tuning
Name
Sound
Weak Signal Boost
Programme Edit
Italy
12
PAL
BG
S23
217.25
S23
Stereo/Dual 1
Off
Picture Audio Timer Install Setup Option
¥
Move OK: Select MENU: Previous EXIT: Exit
Sound
Stereo / Dual 1
Mono / Dual 1
Stereo / Dual 2
Mono / Dual 12
Auto Tuning
Programme
Colour
System
Manual Tuning
Fine Tuning
Name
Sound
Weak Signal Boost
Programme Edit
Italy
12
PAL
BG
S23
217.25
S23
Stereo/Dual 1
Off
¥
Picture Audio Timer Install Setup Option
Name
¥
Move 0~9 Adjust OK: Clear MENU: Previous EXIT: Exit
Name S 2 3
English
21
Settings
The names of the channels are programmed into the receiver. You can change these names manually.
1 Press . To return to the main menu, press
several times.
2 Press ¥ or and select INSTALL.
3 Press or and select PROGRAMME.
4 Press ¥ or and select the desired channel.
5 Press or and select NAME.
6 Press .
7 Press or to select the desired letter.
8 Press ¥ or to move to the next letter.
9 Press to save the settings.
The unit can record and play back stereo sounds.
1 Press . To return to the main menu, press
several times.
2 Press ¥ or and select INSTALL.
Press or and select SOUND.
3 Press .
4 Press or to select the desired setting.
5 Press to save the settings.
The following settings are available:
Stereo/Dual 1: National language stereo
Mono/Dual 1: National language mono
Stereo/Dual 2: Foreign language of the program
Stereo/Dual 12: Both languages at the same time
Change Channel Name
Sound Settings
This setting is only available if the tuner is receiving a signal from the roof
aerial or the cable. If you have connected an external device, set the language
on this device.
¥
1027_A50-095300_Eng 10/27/06 9:44 PM Page 21