Epson 3010 Home Theater Screen User Manual


 
Maintenance 63
5. Gently tap both sides of the air filter against a hard surface four
or five times to remove loose dust from the air filter.
Note: Do not use excessive force when tapping the air filter, or it
may crack and become unusable. Do not rinse the air filter in water,
or use any detergent or solvent to clean it. Do not used canned air,
or the gases may leave a residue.
6. Use a small vacuum cleaner that is designed for computers and
other office equipment to remove any remaining dust from the
surface of the filter. If you don’t have one, gently clean the
filter using a very soft brush (such as a clean artist’s
paintbrush).
If the dirt is difficult to remove or the filter is broken, replace
it. You can purchase air filter part number V13H134A38 from
an authorized Epson reseller. To find the nearest reseller, please
call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com
(U.S. sales) or www.epson.ca (Canadian sales).
7. Insert the air filter as shown.
8. Slide the air filter holder back into place.
pl3010_3010e_UG.book Page 63 Wednesday, September 7, 2011 6:28 PM