Filter
Top Products
870-03-005 rev.05/30/03
• ARMS Orderguide • 31
VL Series
The monitor and keyboard move up and down in tandem for ease of use.An optional Slide-Out
Keyboard Tray allows the user to pull out the keyboard to a more comfortable position.The system’s
smooth steel construction is both durable and easy to clean.A quick-connect interface makes monitor
attachment/removal easy.
Part Description Weight Shipping
Number Capacity** Weight
25-022-100, grey* VL Series, VL-9 w/ Standard Keyboard Tray 9–34 lbs 34 lbs
25-022-101, black* (4.1–15.5 kg) (15.5 kg)
25-027-100, grey* VL Series, VL-9 w/ Slide-Out Keyboard Tray 5–30 lbs 40 lbs
(2.3–13.6 kg) (18.2 kg)
97-175-100, grey Retrofit Kit to add Slide-Out Keyboard Tray 5–30 lbs 10 lbs
(2.3–13.6 kg) (4.5 kg)
*Includes Keyboard Tray w/ Sliding Mouse Tray & Wrist Rest Holder (77-050-xxx) and Mouse Pad (85-025-079).
** Combined weight of monitor and keyboard.
Note:•Use of a VESA FDMI Standard compliant flat panel monitor is strongly recommended.We strongly urge you
to contact to verify monitor compatibility prior to ordering.(See page 47 for details.)
•Monitors with cables that exit straight out the back of the monitor, as well as monitors that have
non-removable bases/stands, may not be compatible with the VL Series.The VL Series works best with
cables that exit in a downward or sideward direction.
•Choose a monitor with four-hole mounting pattern at or near top-to-bottom center-line (C/L).
1-1/2" + monitor depth
1-1/2"
(38 mm)
4"
(102 mm)
29-3/8"
(746 mm)
12-1/2"
(318 mm)
4-1/2"
(114 mm)
18-1/4"
(210 mm)
11-3/4"
(300 mm)
29-3/8"
(746 mm)
Page #
38
40
Accessory Options
Wrist Rests & Mouse Accessories
CPU Holders
Storage Components
Peripheral Table
Page #
44
45
46
46
Surface Attachment Options
Direct Mounting
Command Posts
Centerline of Four-Hole
VESA FDMI Pattern
A = 16-1/2 – (B + 3-1/2)
B = Keyboard depth
Fig. 2
Fig. 1
Rear of Monitor
A
A
≤ 7"
(178 mm)
3-1/2"
(89 mm)
B
A
A ≤ 8-3/4"
(222 mm)
16-1/2"
(419 mm)
Exceptions:
If you want to install your keyboard in a forward
position while remaining ≤4" (102 mm) from the
wall, “A”≤7" (178 mm).See Figure 1.
If you want to use a keyboard wrist rest,
dimension “A”can be calculated by adding
3-1/2" (89 mm) to the keyboard depth “B”and
subtracting this sum from 16-1/2" (419 mm).
See Figure 2.
1.Monitor must not be more than 2-1/2" (63 mm) thick.
2.Keyboard should not be more than 7-1/4" (184 mm) deep.
3.Dimension “A”must be no greater than 8-3/4" (222 mm).
4.Slide-Out Keyboard option cannot be used as its depth = 4-1/2" (114 mm).
Mounting Options & Accessories for VL Series
VL Series Attachment
For VL Series to remain less than 4" (102 mm) from the wall when in storage position, follow these guidelines:
Side View
Side View
Slide-Out
Tray model
Front View
Side
View