Filter
Top Products
31
ENGLISH
Settings (Audio)
Analog output settings
[AUDIO q Analog Out]
2ch *
Outputs audio from the FRONT L and R terminals. If the
source is multi-channel surround, this is downmixed into 2
channels. Use this setting when you have no multi-channel
analog connections.
Multi Channel
Use this when the unit is connected to an AV amplifier with
5.1 surround analog inputs. The sound is output from the six
multi-channel analog outputs.
<
Note that the audio volume changes when the mode is
changed between 2-channel to multi-channel.
Also note that some DVD discs cannot be downmixed (from
multi-channel to 2-channel). In these cases, no digital sound
will be output.
<
Speakers should be set up properly for multi-channel use. See
page 36 for details.
Digital output settings
[AUDIO q Digital Out]
ON *
Audio is output from the digital terminals.
OFF
Audio is not output from the digital terminals. If you are not
using the digital terminals, we suggest that you use this OFF
setting for better analog sound.
<
No digital output is possible from SACD discs.
<
DVD audio at 192kHz or 174.4kHz is converted to
96/88.2kHz sampling frequency.
< If downsampling is turned on, 192kHz and 96kHz discs will
be automatically converted to 48kHz digital audio, and
174.4kHz and 88.2kHz discs will be converted to 44.1kHz
audio. Some discs converted in this way may not output
digital audio (depending on the disc).
CD Digital Direct
[AUDIO q CD Digital Direct]
Direct *
This setting bypasses unnecessary circuitry and provides better
sound quality when listening to audio CDs.
Normal
Use this setting only when playing back DTS-CDs (DTS digital
surround).
Move
Analog Out
Digital Out
CD Digital Direct
Audio DRC
Group Playback
2ch Down Mix
2ch *
Multi Channel
Return Select Exit
Move
Analog Out
Digital Out
CD Digital Direct
Audio DRC
Group Playback
2ch Down Mix
ON *
OFF
Return Select Exit
Move
Analog Out
Digital Out
CD Digital Direct
Audio DRC
Group Playback
2ch Down Mix
Direct *
Normal
Return Select Exit