EverFocus EDR810H DVR User Manual


 
(6) HTTP PORT: The default port number is 80. User can change it to different port number for
HTTP/WEB communication between DVR and client PC.
(7) CONTROL PORT: The default port number is 1600. User can change it to different port
number for Controlling comment between DVR and client PC.
(8) DATA PORT: The default data transmitting port number is 32760. User can change it to
different port number.
(9) MAC ADDR: It display out this DVRs MAC address. Each DVR has unique MAC address.
This is non-changeable.
Please Note: Since every Network Configuration is different, please contact your Network Administrator or ISP
for how to assign those IP addresses and port numbers.
DVR can send out Alarm message to an Alarm Server. In the ALARM of the NETWORK SETUP MENU,
we define:
(1) PROTOCOL: Select which communication protocol with Alarm servers or Alarm receiving clients.
TCP: communicate with client via TCP protocol.
UDP: communicate with client via UDP protocol
(2) PORT NUMBER: setting the communication port with Alarm server.
(3) UNIQUE ID: setting the ID number of your DVR to Alarm server.
3.7.2 ALARM (Reserved)
45