Filter
Top Products
(13) MATRIX MON 4: Display on matrix monitor 4 when an alarm occurs.
NO CHANGE: Nothing changes on the display in the matrix monitor 4 when an alarm occurs.
CAMERA 1~16: Display an assigned camera in full screen mode to the matrix monitor 4.
(14) SUMMARY:
Dial Jog to change items in the SUMMERY table.
All motion’s statuses are shown in SUMMARY table. This table is only for checking motion
overall statuses, not for setting.
(15) EDIT MULTIPLE MOTION AREA
Enter a desired channel, and press SELECT or tilt wheel of the mouse to edit a motion area.
Please make sure that MOTION is set as “Enable” before entering the motion detection area.
In the motion edit mode:
The default motion area of each camera is
the entire screen which displays in light
green.
Press COPY or left-click the mouse to start
setting an area.
Press SEARCH to end and enable the
area, or press PAUSE to end and disable
the area. Alternatively, right-click the mouse
to obtain a selection menu, select “ON” to
end and enable the area and “OFF” to end
and disable the area by clicking on “+” or “-”
sign. Then press “OK”.
36