EverFocus EDR 410 DVR User Manual


 
70
6.4 REMOTE PTZ CONTROL
1. Select the PTZ camera from drop-down menu.
2. Use Direction Arrows (up, down, left, right) to move the camera to the desired direction and angle.
3. In the Iris option, you can increase the amount of light by clicking Open or decrease it by clicking Close.
4. In Focus option, click N to increase the focus or click F to decrease the focus.
5. Under Zoom, Click “IN” to zoom closer or “OUT to zoom farther away.
6. In the keypad section, click on the numbers to input a desired pre-set position.
- Click Set to confirm a position
- Click Clear to delete a position
- Click GO to jump to a position.
7. Tilt allows you to select the movement speed you want to use. The 4 options available are Step x1,
Step x5, Step x10, and Continuous.