Filter
Top Products
MENU
(1) RS232 BAUD RATE: There are 6 different speeds that can be used to transmit instruction or
information through the RS232 port on the device, 1200 baud,2400 baud,4800 baud,9600 baud,
19200 baud,and 3840 baud. The default setting from the factory is 9600 baud.
(2) RS232 STOP BIT: Select stop bit: 1 or 2
(3) RS232 PARITY: Select parity mode: NONE/ODD/EVEN
(4) RS232 DATA BIT: Select data bit : 8 or 7
(5) RS485 BAUD RATE: There are 6 different speeds that can be used to transmit instruction or
information through the RS485 port on the device, 1200 baud,2400 baud,4800 baud,9600 baud,
19200 baud,and 3840 baud.
(6) RS485 STOP BIT: Select stop bit: 1 or 2
(7) RS485 PARITY: Select parity lever: NONE/ODE/EVEN
(8) RS485 DATA BIT: Select data bit : 8 or 7
(9) RS232/RS485 ID: RS232/RS485 address.The address range for the DVR: 001~200.
NOTE: Settings for remote keyboards KS-KBK and KS-KBJ:
RS-485 Baud rate: 9600, 1 Stop bit, Parity NONE, ID (device number) range: 1~32
21
6.10 CONTROL SETTING MENU
In the CONTROL SETTING MENU, we define
CONTROL SETTING MENU
RS232 BAUD RATE
RS232 STOP BIT
RS232 PARITY
RS232 DATA BIT
RS485 BAUD RATE
RS485 STOP BIT
RS485 PARITY
RS485 DATA BIT
RS232/RS485 ID
: 9600 BPS
: 1
: NONE
: 8
: 9600 BPS
: 1
: NONE
: 8
: 001
Turn the JOG dial clockwise or counter-clockwise to select the options.
Press MENU key to return to Main Menu, press again to leave Set up Menu.
MENU
Press ENTER key to confirm the option and move to next column.
ENTER
CALL
Press CALL key to confirm the option and move to previous column.