Filter
Top Products
9
FAQ
Question:
What type of battery does inDtube’s Remote Control use?
Answer:
inDtube’s Remote Control uses a Lithium Cell CR2025 3V battery. This
battery can be purchased at most electronic stores if a replacement is
needed. To gain access to the battery, turn over the remote so that you are
looking at the back and that the IR output is pointed away from you. The
battery holder, located at the bottom end of the remote, will slide out if you
pinch the left edge to the right and pull at the same time. A small hole is
provided to use with a pen or other pointy object to assist in sliding out
the battery holder. The holder should now slide out and the battery will be
revealed. Be sure the + side (positive side) of the battery corresponds to
the + located on the plastic battery holder. Once you are sure the battery is
installed correctly, slide the holder back in to secure it.
Question:
Does the inDtube work with other TV Tuner applications?
Answer:
inDtube should work with most popular TV Tuner applications, however
only the included software is offi cially supported. If using an application
other than what was included and are experiencing problems, then contact
the developer of the software in use.
Question:
I am having problems with viewing and recording video through my TV
Tuner program.
Answer:
Be sure that you are using the proper cables and that they are connected
properly to both the AV-input adapter and the output device. Be sure that
the drivers have properly been installed for inDtube. Contact the program’s
Software Developer for help and support.
Now that you have inDtube’s hardware setup, it is recommended
to read over the included TV Tuner software’s manual located on
inDtube’s Installation CD.