Filter
Top Products
119
D824/D1624 Reference Manual (Changing the Initial Settings <SETUP mode>)
44.1kHz
SETUP
42
∞
_
OL
0
87654321
30
24
18
12
9
6
3
161514131211109
44.1kHz
SETUP
42
∞
_
OL
0
87654321
30
24
18
12
9
6
3
161514131211109
44.1kHz
SETUP
42
∞
_
OL
0
87654321
30
24
18
12
9
6
3
161514131211109
44.1kHz
SETUP
42
∞
_
OL
0
87654321
30
24
18
12
9
6
3
161514131211109
Scrolled and displayed
To cancel the operation, or to restore the setting
obtained prior to the EXECUTE/YES key press, press
the STOP button or the EXIT/NO key. Each time you
press one of these keys, the recorder returns to the
previous hierarchy level of the menu, and finally exits
SETUP mode and displays the previous Time Base.
* For more information on audio files and events, refer
to the “Audio file and event” section of the ”Before
Starting” chapter.
3.Use the JOG dial to select another (01-24) to check
the number of events on the corresponding track.
4.Press the EXIT/NO key or the STOP button
repeatedly to exit SETUP mode.
Drive Format Information (“Drive Info?” menu)
Format information of the current drive presently installed can be checked by using the “Drive Format
Information” menu. Should any trouble occur in the recorder, providing the information obtained here to
our nearest Fostex Service Station will be of great help in giving quick service. The following items will be
displayed and can be confirmed.
1. Manufacture / Model of the currently installed hard disk.
2. Format method
3. Last day of formatting in standard type
4. Format type
5. Simultaneously recordable number of tracks
6. Number of bits at formatting
7. Sampling frequency at formatting
8. Present number of programs
9. Present number of free blocks
10. Audio file / maximum number of events and its program No.
11. Maximum number of events of the time code and its program number
12. Specific capacity of the drive
13. Remaining capacity of the drive
14. Present software version
15. Present multiple undo function mode on/off
Checking method of the format information
1.While the recorder is stopped, press the SETUP
key to enter SETUP mode.
2.Turn the JOG dial to select [Drive Info?] ([?]
flashes), and then press the EXECUTE/YES key.
First, the manufacturer / model of the currently installed
hard disk will scroll and displayed.
3.As the JOG dial is rotated, information is displayed
one after the other (See display examples).
* This indicates that the formatting method is
standard.
In addition to [Standard] formatting method, [Quick] or
[Erase] will be displayed.
* The last date in when it was formatted in standard
will be displayed.
The disk formatted by [Quick] will be displayed as
[--, -, -’ -].