Filter
Top Products
D824/D1624 Reference Manaul (Preview Function)
62
Preview Function
1 sec. (mute playback) 1 sec. (normal playback)
The sound rises at the memory point.
SHIFT key
CLIPBOARD IN key
AUTO RTN START key
AUTO PUNCH OUT key
CLIPBOARD OUT key
AUTO RTN END key
AUTO PUNCH IN key
1 sec. (normal playback)
1 sec. (mute playback)
The sound falls at the memory point.
Approx. 2sec.
Memory data
Memory data
SHIFT key
8
7
6
5
4
32
1
16
15
14
13
12
11
10
9
8
7
6
5
4
32
1
16
15
14
13
12
11
10
9
Approx. 2sec.
44.1kHz
LOCATE
42
∞
_
OL
0
87654321
30
24
18
12
9
6
3
161514131211109
44.1kHz
LOCATE
42
∞
_
OL
0
87654321
30
24
18
12
9
6
3
161514131211109
The preview function enables you to repeatedly audition the rise (fade in) or the fall (fade out)
of the sound data at a locate point (edit point) that is stored in the AUTO PUNCH IN/OUT, AUTO
RTN START/END, or CLIPBOARD IN/OUT key. This is also called “point rehearsal.”
With this function, you can check the locate points in real-time. You can also use this function to
fine-tune the position of the locate points while previewing the sound. This function is effective
only when the recorder is stopped.
• Previewing the rise of the sound (fade in)
While holding down the SHIFT key, press the AUTO RTN
START key, the AUTO PUNCH OUT key, or CLIPBOARD IN
key.
• Previewing the fall of the sound (fade out)
While holding down the SHIFT key, press the AUTO END
START key, the AUTO PUNCH IN key, or the CLIPBOARD
OUT key.
<Display indication during the Preview operation>
The recorder repeats playback the “rise sound”
at the locate point (edit point). As shown in
the diagram, one-second of data prior to the
locate point is muted during playback. The
mute is off (fade in) at the locate point and the
sound is played back for one second.
The recorder will repeat this operation until
you quit the Preview function.
<Display indication during the Preview operation>
The recorder repeats playback of the “fall
sound” at the locate point (edit point). As
shown in the diagram, one-second of data prior
to the locate point is played back, then muted
(fade out) at the locate point. The muted
playback continues for one second. The
recorder will repeat this operation until you quit
the Preview function.
During operation, the meter display will light up from left to right.
During operation, the meter display will light up from left to right.