Filter
Top Products
D824/D1624 Reference Manual (Editing Tracks)
72
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
Track 9
Track 10
Track 11
Track 12
Track 13
Track 14
Track 15
Track 16
Track 17
Track 18
Track 19
Track 20
Track 21
Track 22
Track 23
Track 24
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
Track 9
Track 10
Track 11
Track 12
Track 13
Track 14
Track 15
Track 16
Track 17
Track 18
Track 19
Track 20
Track 21
Track 22
Track 23
Track 24
Real tracks 1-8
Additional tracks 9-16
Additional tracks 17-24
Real tracks 1-8
Additional tracks 9-16
Additional tracks 17-24
Real tracks 1-8
Real tracks 9-16
Additional tracks 17-24
Real tracks 1-8
Real tracks 9-16
Additional tracks 17-24
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
Track 9
Track 10
Track 11
Track 12
Track 13
Track 14
Track 15
Track 16
Track 17
Track 18
Track 19
Track 20
Track 21
Track 22
Track 23
Track 24
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
Track 9
Track 10
Track 11
Track 12
Track 13
Track 14
Track 15
Track 16
Track 17
Track 18
Track 19
Track 20
Track 21
Track 22
Track 23
Track 24
Track Exchange
The Track Exchange function enables you to swap mono track data or multiple track data of the
current Program between Real tracks and Additional tracks in units of single or multiple tracks.
You can swap mono track data between Real tracks, Additional tracks, or between a Real track and
an Additional track. You can swap multiple track data between eight Real tracks (1-8) and Additional
tracks (9-16 or 17-24). Refer to the diagrams below for information on how data on the tracks can
be moved using this function.
The Track Exchange function also enables you to move Real track data to an empty Additional track
(to empty the original Real track) so that you can use the Real track for a new recording.
This capability lets you use tracks more flexibly.
You need to move data on an Additional track back to a Real track to audition the data, since data
on an Additional track cannot be played in real-time.
You can also use this function when you wish to check the REC END point of an Additional track, as
described in the “Erase” section. Execute [Track Exchange] with the [Track Exchange?] menu in the
SETUP mode of the recorder.
Swapping mono track data between Real tracks,
Additional tracks, or between a Real track and an
Additional track.
Swapping multiple track data between eight Real
tracks and eight Additional tracks (9-16 or 17-24).
D824 and D1624 formatted in 96kHz/24bit
D1624 formatted in other than 96kHz/24bit