Filter
Top Products
MYRICA P42-1A / P42-2 / P50-2
A26361-K1040-Z120-1-M119, edition 3 English - 35
VESA-DDC-compatible VGA interface
Your plasma TV is equipped with a VESA-DDC-compatible VGA interface and a DVI-D interface.
VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the
communications interface between the plasma TV and the computer. If your computer is equipped
with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum
operation from your plasma TV and select the appropriate settings.
Preset operating modes (PC)
The following are the most frequently used of the preset operating modes:
Resolution Refresh rate
640 x 350
640 x 480
800 x 600
1024 x 768
1280 x 720 *)
1280 x 768 *)
1280 x 1024 *)
70 Hz
60 Hz, 72 Hz, 75 Hz
56 Hz, 60 Hz, 72 Hz
60 Hz, 70 Hz, 75 Hz
60 Hz, 75 Hz
60 Hz, 75 Hz
60 Hz
*) not with MYRICA P42-1A
Power consumption
To save energy when the device is temporarily not in use, the plasma TV can be switched into the
standby mode with the remote control (POWER button) or the STANDBY button.
Switched on Standby mode
Power indicator lights green lights red
Function Device operates normally the screen is dark
Power consumption normal < 300 W (P42-1A)
normal < 385 W (P42-2)
normal < 500 W (P50-2)
reduced to < 5 W (P42-1A)
reduced to < 5 W (P42-2)
reduced to < 5 W (P50-2)
i
If the device is switched into the standby mode, a power consumption of up to 5 W is
maintained to enable operation with the remote control.
To completely switch off the power consumption, switch off the device with the ON/OFF
switch (see "Switching plasma TV on/off")..
Downloaded From TV-Manual.com Manuals