Filter
Top Products
E-26
OTHER ADJUSTMENTS (Continued)
Press
C or D to select the items for setting. It is switched as shown as below.
Auto Store < Manual Store < Sort
Press
< to proceed to the next step.
Auto Store
Press E or F to select the country or region, and then press <.
All the channels are scanned, and only the channels that can be received are assigned to the Program Nos.
* Several minutes are required to scan all the channels. To cancel the operation in progress, press
;.
* See page E-32 for the selectable TV frequencies.
Manual Store
Press E or F to select the Program No. to be stored.
Press
C
or
D
to select the Manual Store items to be set (Setting or Name).
Press
<
to proceed.
Setting
Press C or D to select the setting item.
Freq. < System < Adjust < Skip
•Freq.
Each time
E or F is pressed, the TV frequency is switched.
•System
Each time E or F is pressed, the TV SYSTEM is switched.
< West Euro (standard BG reception) < East Euro (standard DK reception) < UK (standard I reception) <
France (standard LL’ reception) <
•Adjust
Each time E or F is pressed, the fine-tune adjustment for Tuning is switched.
•Skip
This function specifies whether or not to use the Skip function for the displayed Program No.
Each time
E or F is pressed, the setting is switched.
<
Off
<
On
<
[Off]: The Skip function is not available when Channel Up/Down has been selected.
[On]: The Skip function is available when Channel Up/Down has been selected.
Press
< to store.
* Select [On] when you want to skip the channels that they are not broadcasting programs.
Name
An eight-character name can be specified for each Program No.
Press
E or F to select the character input position, and C or D to switch through the characters.
When the input is completed, press < to store.
* When switching the programs, etc., the OSD becomes the indication by the stored name.
Sort
This function sorts the name, the data and the contents of stored programs.
Press
C or D to select To (edit destination)/From (edit source), and E or F to switch the Program No.
Press < to store.
CHANNEL SETTING
Channel Settings Screen
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
01_E_7473.book 26 ページ ２００６年９月６日 水曜日 午後２時３６分
Downloaded From TV-Manual.com Manuals