Fujitsu PDS4214W-S Flat Panel Television User Manual


 
E-4
FEATURES
This display has a plasma display panel and is only 8.5 cm deep. With its high image quality and performance, it is perfectly suited to
multimedia applications.
Can receive a variety of input signals
In addition to video, S-video, and RGB1 (mD-sub Connector), RGB2 (BNC x 5 connector) signals, this display supports input of high-
quality video signals such as DVD and HDTV.
The display is applicable to the following color television systems used worldwide: NTSC, PAL, SECAM, N-PAL, M-PAL, 4.43NTSC.
The display has a component video input terminal to receive signals from the DVD player and HDTV equipment as well as digital
broadcasting signals (color difference signals).
The display has an RGB input terminal to receive signals, including wide RGB signals
*1
, VGA, SVGA, and XGA
*2
.
5 screen sizes (video input mode) and 3 screen sizes (RGB input mode)
This display offers a total of five different screen sizes in video input mode: Wide1, Wide2, Zoom1, and Zoom2. A Normal mode is
also available, for display of normal-size (4:3 aspect ratio) images.
Three different screen sizes in RGB input mode (Normal, Wide, and Zoom) are also available.
Install the display lengthwise
The display can be installed lengthwise, enabling advertising to be displayed. In this case, you can set up the display so that on-screen
information, such as input modes and menus, is displayed properly.
Power management function
The display features a DPMS (Display Power Management Signaling) function that ensures automatic power saving capability.
Flexible enough to be used as part of a system
You can operate the display by remote control using the RS-232C interface.
If you have two or more displays, you can assign a unique number to each of them so that you can select which one you want to use.
Others
You can specify the color temperature.
Two-line sound input, 1 W + 1 W built-in speaker, and 7 W + 7 W external speaker outputs are available.
The white screen and screen saver functions are available to minimize phosphor burn-in.
*1 With the optionally available graphics board, you can send wide RGB signals (852 x 480) from your PC.
*2 The refresh rate of 60 Hz for XGA (1024 x 768) and those of 50, 60, 72, and 75 Hz for SVGA (800 x 600) are supported.
Note that the XGA and SVGA images will be smaller when displayed on the screen.