Filter
Top Products
Operator control
12 ENGLISH
Operator control
Switching on / off
S To switch on the LCD/plasma TV press the
[POWER]buttonontheremotecontrolorthebutton
/MENU on the set.
The indicatorPower On / Standbylights up blue on the
LCD/plasma TV.
S To switch off the LCD/plasma TV press the
[POWER] button on the remote control.
The indicator Power On / Standby lights up orange on
the LCD/plasma TV.
If a signal is pending at any input, the LCD/plasma TV
is switched automatically to standby mode after a
waiting period.
Channel change (programme change)
S Select TV mode by pressing the [TV] button on the
remote control.
With the buttons [P
Y]/[PB] on the remote control:
S Press the button[PY]to increasethechannelnum-
ber.
S Press the button [PB] to reduce the channel
number.
With the buttons [0...9] on the remote control:
Select the channel number directly by pressing the
buttons [0...9].
With the channel overview in the OSD menu:
S Press the button [LIST]onthe remotecontroltodis-
play the channel overview on the display.
S Select a channel with the buttons [BY " A]on
the remote control.
S Press the red button to c lose the channel overview.
Volume and sound settings
With the buttons [VOL "]/[A VOL] on the remote
control:
S Press the button [VOL "] to increase the volume.
S Press the button [A VOL] to reduce the volume.
Indication on operation (Power On) (blue)
Indication when on standby (orange)
IR sensor for remote control
/MENU
Channel information
Downloaded From TV-Manual.com Manuals