Filter
Top Products
Operator control
27ENGLISH
Connection to the HDMI input
The LCD/plasma TV is equipped with an HDMI input
for digital video and audio signals.
Connect an HDMI-compatible device, e.g. a DVD
player or a set top box with an HDMI output socket,
to the HDMI input.
S Press the button [F4] to open the selection menu
<Inputs>.
S Select input [Y]/[B] and then press the red button
(M).
You can also select the HDMI input by means of the
[VIDEO] button.
Signal:
640 x 480 @ 60 Hz
480i, 576i, 480p, 576p, 720p, 1080i
HDMI (RGB, YUV) sound 2 channels up to 48 kHz
DVI (RGB), sound via digital COAX IN
Connection to the PC DVI-I input
For the connection of a PC use the input PC DVI-I.
If your PC has a digital DVI output, use a DVIcable for
connection.
If your PC has an RGB output (DSUB 15), use a DVI
adapter cable on a DSUB for the connection.
S Press the button [F4] to open the selection menu
<Inputs>.
S Select input [Y]/[B] and then press the red button
(M).
You can also select the PC inputs by means of the
[PC] button.
Settings for PC (RGB)
S Press the [MENU] button to open the main menu.
S With the button [ Y]or[B] select the <Setup> menu
and press the button [
"].
S Select <Inputs> [Y]/[B] and press the button ["].
Auto Setup
S Press the button ["] to start Auto setup.
Thisfunctionwillnowattempttofindtheoptimalpic-
ture settings for the pending signal. During setting
the picture will move slightly back and forth.
H Total
S You can correct the scanning frequency for the PC
picturehere.This function is intended only forcom -
petent users.
HDMI
Signal
ENGLISH
PC (DVI)
Signal
PC (RGB)
Signal
Downloaded From TV-Manual.com Manuals