FUNAI CIWP4206 A Flat Panel Television User Manual


 
23
EN
WATCHING TV / OPTIONAL SETTINGS
SETUP SCREEN
This section describes the overview of the setup
screen displayed when you press
[SETUP].
For more details, see the reference page for each
item.
The setup screen consists of the function setting
items below.
To exit settings.
You can adjust the picture quality (Picture Mode,
Brightness, Contrast, Color, Tint, Sharpness,
Color Temp.).
(Refer to “PICTURE ADJUSTMENT” on page 24.)
You can automatically scan the viewable channels
and remove those that are undesired.
(Refer to “AUTOSCAN” on page 14.)
You can change closed captioning display formats
and font styles. (Refer to “CLOSED CAPTION” on
page 25.)
Block children’s access to inappropriate program-
ming. (Refer to “V-CHIP” on page 28.)
And select HDMI Audio if your TV is connected to
a digital external device like a DVD recorder.
(Refer to “HDMI AUDIO” on page 30.)
You can change the language (English, Spanish,
French) displayed on the setup screen.
(Refer to “LANGUAGE SELECTION” on page 17.)
NOTES:
• To cancel the setup screen, press [SETUP].
• If you do not operate this TV for more than 45 seconds dur-
ing initial setup, the message boxes start to move to the
lower left-hand corner of the screen.This is to save your
screen from burn-in. Press any key except
[POWER] to can-
cel it.
SLEEP TIMER
The Sleep Timer can be set to automatically turn
off your television after an incremental period of
time.
1
Press [SLEEP] on the remote control to set the
Sleep Timer.
• The setting display for Sleep Timer is shown on
the screen.
2 You can set your TV to turn off after a set period
of time (from 10 to 90 minutes). After set up, you
can display the remaining time before shut off by
pressing
[SLEEP] again.
• To cancel the sleep timer, press
[SLEEP]
repeatedly until “Sleep Off” is displayed.
• The Sleep Timer setting display will automati-
cally disappear in a few seconds.
NOTE:
• When you disconnect your TV from its power source or
when a power failure occurs, the sleep timer setting will be
canceled.
Sleep
Off
Sleep
Off
ENTER
POWER SLEEP
AUDIO
STILL
SETUP
SCREEN
MODE
1 2 3
4 5 6
7 8 9
-
0
INPUT
SELECT
SLEEP
O
PTIONAL SETTINGS