FUNAI CIWP4206 A Flat Panel Television User Manual


 
31
EN
OPTIONAL SETTINGS / ATTACHING A WALL MOUNT BRACKET (SOLD SEPARATELY)
1
Turn the TV over and place it screen-first onto a
table which has a soft cloth draped over it.
Place the TV in a way so that the stands hang
over the edge of the table.
2 Remove the stands from the TV.
Unscrew the M5 screws indicated by , and
remove the left and right stands.
3 Attach the left and right TV rails to the TV using
the M8 screws included with the wall mount kit.
indicates the position of the screw holes on
the TV.
4 Attach the TV to the wall.
* If you want to attach the stands of this TV again,
insert the stand slowly as illustrated below and
drive screws in the 4 threaded holes ( ).
1
2
1
A
TTACHING A WALL MOUNT BRACKET
(SOLD SEPARATELY)
The following is a description of the method for attaching a wall mount to the TV.
When performing this operation, refer to the instruction manual included with the wall mount kit.
ANT. IN
AUDIO OUTAUDIO
HDMI
COMPONENT2
Y
Pb
Pr
L
R
AUDIO
Y
Pb
Pr
L
R
AUDIO
L
R
AUDIO
VIDEO1
AC IN
S-VIDEO1
COMPONENT1
HDMI IN
L
R
L
R
DIGITAL
AUDIO OUT
(COAXIAL)
2
Stands
Rear of this TV
1
1
#
CAUTION
•Any damage caused by incorrectly attempting to mount the TV is not covered under the terms of the
manufacturer’s warranty.
This TV is for use only with the Sanus Systems Model VMPL. Wall Mount. Use with other wall mounts
may result in instability causing possible injury.
NOTE:
The screws and stands you have removed are neces-
sary for reattachment at a later date. Make sure to
keep them in a safe place.
NOTES:
Only use the screw holes indicated by for mount-
ing the TV.
•For instructions on how to attach the TV rails, refer to
the instruction manual included with the mount wall
kit.
2
NOTES:
Make sure to use a table which can support the
weight of the TV and is larger than the TV.
Make sure the table is in a stable location.
NOTE:
Refer to the instruction manual included with the
mount wall when securing the TV to the wall.
1