Filter
Top Products
14
OPERATING THE PLASMA DISPLAY
INPUT SELECT
DISPLAY
MENU
PREVIOUS
SLEEP
MENU
B{
PREVIOUS
K
L
Automatically Adjusting the Picture
Settings
1 Select "Picture mode" on the PICTURE
SELECT screen with the
K
/
L
buttons.
2 Select the automatic adjustment mode accord-
ing to the type of picture displayed on the
screen with the { / B buttons.
NOTE:
• There are 3 modes for automatically adjusting the
picture settings; "News", "Movie" and "Dynamic".
• MANUAL refers to manual picture settings adjust-
ment.
3 Press the PREVIOUS button to return to the
MAIN MENU.
NOTE:
• Pressing the MENU button cancels the menu.
Manually Adjusting the Picture Settings
1 Select "Picture mode" on the PICTURE
SELECT screen with the
K
/
L
buttons.
2
Select "Manual" with the { / B buttons.
The display enters the manual mode, and you
can specify individual adjustments.
3
Select the mode to adjust with the
K
/
L
but-
tons.
The modes rotate in the following order:
"Picture mode" - "Brightness" - "Contrast" - ..
...- "Reset" - "Picture mode"
4 Adjust the selected mode using the { / B but-
tons.
NOTE:
• If you have selected Brightness, Contrast, Color,
Tint, or Sharpness, the menu display disappears,
and a bar for adjusting the selected mode
appears in the center of the bottom of the screen.
•You can select "Color temp." from among three
modes: "Normal", "Warm" and "Cool".
• If you select "Reset" and press the B (ENTER)
button, the adjusted values return to their initial
settings.
5
To adjust a different mode, repeat steps 3 and 4.
6 Press the PREVIOUS button to return to the
Picture mode.
NOTE:
• Pressing the MENU button cancels the menu.
Initializing the Adjustments
1
Select "Reset" on the PICTURE SELECT
screen with the
K
/
L
buttons.
2 Press the B (ENTER) button.
The settings you specified individually are ini-
tialized.
NOTE:
• The initialized setting of "Manual" are as follows:
BRIGHTNESS: 50/100
CONTRAST: 70/100
COLOR: 50/100
TINT: 50/100
SHARPNESS: 1/2
COLOR TEMP.: Normal
L0601(EN)v1.qx3 04.8.10 3:08 PM Page 14