Filter
Top Products
6
C
OMPONENT NAMES
1 POWER button: Tur ns the power ON or in
STANDBY.
2 ON indicator: Lights up when the power is
ON.
3 STANDBY indicator: Lights up when the
power is in the standby mode. Disappears
when the power is ON.
4 INPUT SELECT button: Selects input termi-
nals.
5 VOLUME
K
(up) /
L
(down) button:
Increases or decreases the volume.
6 AC IN terminal: Connect the supplied power
cable for a standard AC outlet.
7 AUDIO OUT: Output terminals for audio.
8 AUDIO/VIDEO/S-VIDEO: Input terminals for
an audio and video signal.You can select
either VIDEO or S-VIDEO.
9 COMPONENT: Input terminals for a compo-
nent signal.You can make a Y-Cb-Cr inter-
laced connection to component 1 or Y-Pb-Pr
progressive or interlaced connection to com-
ponent 2.
MAIN UNIT
VOLUME
INPUT SELECT
STANDBY
ON POWER
VOLUME
INPUT SELECT
STANDBY
ON POWER
1
2
3
4
Infrared Sensor
5
Input Terminals
Input Terminals
R L Y Cb Cr
RLYPbPr
AUDIO
COMPONENT 1
COMPONENT 2
VIDEO1AUDIO S-VIDEO1
LR
R
L
AUDIO OUT
AC IN
AUDIO
VIDEO2
S-VIDEO2
R
L
6 7 8 9
8
Front Rear
Figure 2
Figure 3
L0601(EN)v1.qx3 04.8.10 3:08 PM Page 6