31
EN
OPTIONAL SETTINGS / ATTACHING A WALL MOUNT BRACKET (SOLD SEPARATELY)
1
Turn the TV over and place it screen-first onto a
table which has a soft cloth draped over it.
Place the TV in a way so that the stands hang
over the edge of the table.
2 Remove the stands from the TV.
Unscrew the M5 screws indicated by , and
remove the left and right stands.
3 Attach the left and right TV rails to the TV using
the M8 screws included with the wall mount kit.
indicates the position of the screw holes on
the TV.
4 Attach the TV to the wall.
* If you want to attach the stands of this TV again,
insert the stand slowly as illustrated below and
drive screws in the 4 threaded holes ( ).
1
2
1
A
TTACHING A WALL MOUNT BRACKET
(SOLD SEPARATELY)
The following is a description of the method for attaching a wall mount to the TV.
When performing this operation, refer to the instruction manual included with the wall mount kit.
ANT. IN
AUDIO OUTAUDIO
HDMI
COMPONENT2
Y
Pb
Pr
L
R
AUDIO
Y
Pb
Pr
L
R
AUDIO
L
R
AUDIO
VIDEO1
AC IN
S-VIDEO1
COMPONENT1
HDMI IN
L
R
L
R
DIGITAL
AUDIO OUT
(COAXIAL)
2
Stands
Rear of this TV
1
1
#
CAUTION
•Any damage caused by incorrectly attempting to mount the TV is not covered under the terms of the
manufacturer’s warranty.
• This TV is for use only with the Sanus Systems Model VMPL. Wall Mount. Use with other wall mounts
may result in instability causing possible injury.
NOTE:
• The screws and stands you have removed are neces-
sary for reattachment at a later date. Make sure to
keep them in a safe place.
NOTES:
• Only use the screw holes indicated by for mount-
ing the TV.
•For instructions on how to attach the TV rails, refer to
the instruction manual included with the mount wall
kit.
2
NOTES:
•
Make sure to use a table which can support the
weight of the TV and is larger than the TV.
• Make sure the table is in a stable location.
NOTE:
• Refer to the instruction manual included with the
mount wall when securing the TV to the wall.
1