FUNAI MBP5120F/F7 Blu-ray Player User Manual


 
7
1. AC power cord
2. LAN terminal
3. HDMI OUT jack
4. AUDIO OUT jacks
5. DIGITAL OUT (COAXIAL) jack
6. Wireless LAN (Internal)
7. VIDEO OUT jack
Note
Do not touch the inner pins of the jacks on the
rear panel. Electrostatic discharge may cause
permanent damage to the unit.
This unit does not have the RF modulator.
Do not try to rip the internal wireless LAN from
the unit.
Front Panel
STOP PLAY
STANDBY/ON
OPEN/
CLOSE
SD card
1 3 4 5* 62*
9
87
1. Disc tray
2. A OPEN/CLOSE button*
3. Infrared sensor window
4. C STOP button
5. B PLAY button*
6. PLAY indicator
• This indicator lights up in green when discs or
SD cards play back.
7. STANDBY/ON indicator
• This indicator lights up in red when the power
is in the standby mode.
8. y STANDBY/ON button
• Press to turn on the unit, or to turn the unit
into the standby mode. (To completely turn
off the unit, you must unplug the AC power
cord.)
• Press and hold for 10 seconds to shut down
the unit.
9. SD card slot
Note
This unit will be turned into the standby mode
automatically after 25 minutes of no action.
L
R
AUDIO
OUT
VIDEO
OUT
HDMIOUT
LAN
Wireless LAN
COAXIAL
65
4
32
1
7
Rear Panel
(*) The unit can also be turned on by pressing
these buttons.