Filter
Top Products
18
1. Press and hold the SETUP button until CODE SETUP is displayed (takes
about 3 seconds), then release the SETUP button.
2. Press the down navigation button repeatedly until LEARN SETUP is
displayed. Press and release OK.
3. MODE LEARN is displayed. Press and release OK.
4. MODE KEY? is displayed. Press and release the desired Mode button
(TV, VCR, DVD, etc.).
5. LEARN KEY? is displayed. Press and release the key on the 24999 remote
that you want to be taught a code, e.g. POWER.
6. LEARNING is displayed. Pointing the remotes as shown below, press
and hold the original remote key (e.g. POWER) until the SUCCESS or
LEARN ERROR is displayed (see Tips on Learning, page 19) followed by
LEARN MORE? (this process can take up to 2 or 3 seconds to complete).
Release the original remote button.
7. LEARN MORE? is still displayed. To learn more buttons, press and release
OK and repeat from step 5. To exit at this point, press and release EXIT.
8. PLEASE WAIT is displayed briefly and the remote exits Setup Mode and
returns to normal operation.
Learning Commands
Line up your remotes (that you’re learning from) in front of the Learning
remote, on a hard surface approx. 1 inch apart.