Filter
Top Products
19
To Clear all Learned Commands under a mode
Clearing learned commands is helpful if, for example, you replace your
CD player with another brand or model. If you had learned a feature
from your old CD player’s original remote on to this remote (such as
RANDOM PLAY), that feature would no longer work for your new CD
player. Should you wish to remove or clear one or more “learned”
commands, follow the steps below:
1. Press and hold the SETUP button until CODE SETUP is displayed (takes
about 3 seconds), then release the SETUP button.
2. Press the down navigation button repeatedly until LEARN SETUP is
displayed. Press and release OK. MODE LEARN is displayed.
3. Press the down navigation button until MODE CLEAR is displayed. Press
and release OK.
4. MODE KEY? is displayed. Press and release the desired Mode button
(TV, VCR, DVD, etc.).
5. CONFIRM CLEAR is displayed. Press and release OK.
6. PLEASE WAIT is briefly displayed followed by SUCCESS and the remote
exits Setup Mode and returns to normal operation.
Master Clear - To Clear all Learned Commands under all modes
(recommended on first time Learning)
1. Press and hold the SETUP button until CODE SETUP is displayed (takes
about 3 seconds), then release the SETUP button.
2. Press the down navigation button repeatedly until LEARN SETUP is
displayed. Press and release OK. MODE LEARN is displayed.
3. Press the down navigation button repeatedly until ALL LEARN CLEAR
is displayed. Press and release OK.
4. CONFIRM CLEAR is displayed. Press and release OK.
5. PLEASE WAIT is briefly displayed followed by SUCCESS and the remote
exits Setup Mode and returns to normal operation.
Clearing Commands