GE VG4061 VCR User Manual


 
39
OTHER FEATURES
On-Screen Displays
The INFO button shows the status of the VCR (STOP, PLAY,
RECORD, etc.), channel number, time counter, date, time, and
tape speed on the TV screen. The date and time must be set
before they can be displayed.
1. Press INFO to see the on-screen displays.
2. Press INFO again to have only the time counter remain on
the screen.
3. Press INFO again to return to the normal display.
No displays appear on the screen.
Turning off the VCR also resets the displays.
Tracking
Your VCR has automatic tracking which removes the streaks or
snow from the picture. Automatic tracking is activated when you
insert a tape or turn on the VCR. Occasionally you may need to
manually adjust tracking, especially if the tape was recorded on
a different VCR. Just use the TRACKING buttons to remove the
streaks or snow. You can also use tracking when you pause a
tape to reduce jittering of the picture.
When you manually adjust the picture, automatic tracking is
turned off. To turn automatic tracking back on, press both
TRACKING buttons on the front of the VCR at the same time, or
eject the tape and re-insert it.
Tracking has no effect during recording--only playback.
Timer counter only
(does not time out)
On-screen display (times out)
Normal display
STOP CH 05 0:30:00
11/17/97 Mon 01:30PM SLP
0:30:00
1
2
3