Filter
Top Products
page | 20
Advanced Operation
Commands
Command Description
#cdr
De-emphasis control; enable/disable CDR bypass
#ddcmode
Sets the DDC mode
#de
Sets the de-emphasis on the output
#edidbatolo
Copies the specied EDID bank to the local input
#ediddetolo
Set to default EDID on local input
#ediddstoba
Read downstream EDID and stores in EDID Bank
#ediddstolo
Read the downstream EDID and stores in the local input
#eq
Adjusts the equalizer settings
#eqstat
Displays the current equalizer status
#eredidbank
Erases the specied EDID bank
#fadefault
Resets the booster to factory-default settings
#fw_upgrade
Updates the booster rmware
#help
Displays the list of available commands
#loedidtoba
Loads an EDID le to the specied EDID bank
#maskout
Enables / disabled video output
#prbaedid
Displays the EDID in the specied bank
#prdsedid
Displays the downstream EDID
#prloedid
Displays the EDID stored in the local input
#saveloedid
Saves the EDID on the local input to a le
#show_ver_data
Displays the current hardware and rmware version
#vstat
Displays the signal loss on the input