Filter
Top Products
Sender Unit
1 Video
This LED indicator will glow bright blue once a video link is established between
the Sender unit and the Receiver unit.
2 Pairing button
Press and hold this button for 3 seconds to pair the Sender unit with the
Receiver unit.
3 Link
This LED indicator will glow bright blue once a link is established between the
Sender unit and the Receiver unit.
4 USB
Connect the included USB to Mini-USB cable from the computer to this Mini-B
port.
5 HDMI Connector
Connect the Sender unit to a Hi-Def source using this HDMI connector.
Receiver Unit
1 Pairing button
Press and hold this recessed button using a paper clip for approximately 3
seconds to pair the Sender unit with the Receiver unit.
2 IR Sensor
Receives IR commands from the included IR Remote Control unit and the IR
remote of the source unit to be controlled.
3 Link
This LED indicator will glow bright blue once a link is established between the
Receiver unit and the Sender unit.
4 Video
This LED indicator will glow bright blue once a video link is established between
the Receiver unit and the Sender unit.
5 USB
Mini-USB service port (for factory use only).
6 HDMI Out
Connect the included HDMI cable from this connector to an HD display.
7 Power
Connect the included 5V DC power supply to this receptacle.
8
PANEL DESCRIPTIONS