Filter
Top Products
Using Multiple Sender Units
The Wireless for HDMI can be used with multiple Sender units to provide
switching capability between up to eight Sender units.
Adding a new Video Source
Before adding a secondary Sender unit to the Wireless for HDMI network, make
sure that a single Sender / Receiver pair function correctly.
1. Connect the Sender unit to a Hi-Def source using an HDMI cable.
2. Connect the power supply to the Sender unit.
3. Point the IR Remote Control at the Receiver unit and press the MENU
button. The Setup menu will be displayed.
12
Link
Video
Wireless for HDMI R
Wireless for HDMI S
Video
Link
Wireless for HDMI S
Video
Link
Wireless for HDMI S
Video
Link
Figure 1:
Receiver unit shown
with multiple Sender
units
Setup
Add new Video Source
Remove Video Source
Modify Video Source Name
Disconnect Wireless Link
To source
To source
OPERATING THE WIRELESS FOR HDMI