Filter
Top Products
BDVR Manual 41 Version 1.2
. Enter the beginning and end time, then select the Record mode for recording.
(1) BEGIN: The time to start recording.
(2) END: The time to end recording. The end time must not be before the starting
time or the same as the start time.
(3) MODE: Up to 4 different recording modes can be pre-determined for schedule
recording (MODE1 ~ MODE4).
. Define modes.
* Refer to Basic Recording for set up
Note:
y The recording time uses a 24 Hour clock (00:00 - 23:59). You need to set 2 days if the setting
goes over one day.
D/W BEGIN END MODE
Monday 18:00 23:59 MODE 1
Tuesday 00:00 08:59 MODE 1
y The recording does not start when End time is ahead of Start time.
EXAMPLE
D/W BEGIN END MODE
Monday 18:00 08:59 MODE 1
. To activate Schedule Recording after configuration, press the SCHEDULE button.
The SCHEDULE indicator illuminates. When a program is within the current time,
the REC indicator illuminates and the unit begins recording. Please note that if there
are no schedules configured the DVR does not record.
. When the scheduled recording period is over, the REC indicator goes off and
recording stops.
. If you wish to stop recording while Schedule Recording, press the SCHEDULE
button. The SCHEDULE indicator goes out and the Schedule Recording Mode is
released.