Filter
Top Products
Tracer 2000 DVR user manual
Version 3.0 Page 22 of 36
P/T/Z Setting
The P/T/Z Setting complies with LILIN or PELCO. Protocol has been previously attached to
the COM ports. You may control the camera via arrow buttons. In this case, you don’t need to
buy dedicated P/T/Z controller.
Pin assignment of COM2
Connect 9 PIN Female D_SUB to COM2 (Pin defines as below)
Cable connection Camera Input jack to COM2 for PIH-7000/7600
For example:
Jumper setting of COM2
The system default of COM2 is RS-485. Adjust Jumper JP3 in system for RS-422,RS-232
signals as shown below.