Go-Video DDV9000 VCR User Manual


 
CHAPTER 6 - RECORD FEATURES 29
Sequential & Loop Record
Two decks give you twice the recording features of a normal
VCR. Sequential Record allows you to insert tapes in both
decks and record one after another. Loop Record allows you
to record both tapes in a continuous loop.
To activate Sequential or Loop Record:
1 Insert tapes in both decks.
2 Press
MENU
until the DUAL-DECK FEATURES menu
appears.
3 Press “5” repeatedly to set RECORD MODE to:
Norm - Tapes record normally.
Seq - (Sequential) Deck 1 records over the entire tape, then
Deck 2 records over the entire tape. If Auto Rewind is
set to on, both tapes will rewind automatically when
recording is finished.
Loop - Deck 1 records to the end of the tape, then Deck 2
begins recording. While Deck 2 is recording, Deck 1
automatically rewinds to the beginning. When
recording is finished in Deck 2, Deck 1 records again
and the process repeats in a continuous loop until
you press the
STOP
key. Rewinding is automatic
regardless of the Auto Rewind setting.
Date/Time Stamp
To help keep track of your tape collection, you can superimpose
a Date/Time Stamp on both regular and Timer recordings. To
activate the Date/Time Stamp:
1 Press
MENU
until the DUAL-DECK FEATURES menu
appears.
2 Press “1” to select VCR SETTINGS/SET CLOCK.
3 Press “5” repeatedly to set DATE/TIME STAMP to:
Timer - The date, time, channel and duration will appear
for 5 seconds at the start of Timer Recordings only.
All - The date, time and channel information will be recorded
for about 5 seconds at the start of all recordings.
Cont - (Continuous) The date, time and channel information
will record continuously on all recordings. This option
disables the On-Screen Display and Menu system.
Stop the recording to resume use of these functions.
Off - Date/Time Stamp is disabled.
Note: The Date/Time
Stamp does not
record during a
Copy Tape
session.
Set two tapes to record
sequentially or in a
continuous loop.
Date/Time Stamp allows you to
superimpose the Date, Time and
Channel on all your recordings.
U
se the Date/Time Stamp with
the Automatic Show Finder feature
to find specific programs on a tape with
multiple recordings (see page 38) .