Go-Video VR2945 DVR User Manual


 
RECORDING
51
You can record from an external component, such as a camcorder or VCR, connected to any of the DVD
Recorder+VCR’s external inputs.
1
Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see pages
15 and 19.
2 Use [ …†] to select the external input to record from.
Tuner: Built-in tuner
LINE1 : Audio/Video on front panel
LINE2 : Audio/Video Input on back panel
DV: DV input on front panel.
3 Load a recordable disc or tape.
4 Set the desired Recording mode by pressing [REC MODE] repeatedly.
DVD: HQ (High Quality - 1 hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Average Quality - 4 hrs/disc), or
SLP (Low Quality - 6 hrs/disc).
VCR: SP (Standard Play), SLP (Super Long Play - 3 times SP)
5 Press [REC ()] once.
Recording will start. The REC indicator lights on the front panel display.
Recording continues until you press [STOP] or the disc is full.
To record for a fixed length of time, see ‘One Touch Record‘ on page 46.
6 Press [STOP ()] to stop recording.
Recording from External Components
Note
If your source is copy-protected, you will not be able to record it using the DVD Recorder+VCR. See ‘Copyright
Notice‘ on page 7 for more details.
Recording from an External Input
Recording from an External Input